Divisible Silos
The divisible silos are built with vertical bands that have different height if the capacity of silo change and with cone and roof divided in sectors. The silos gets bolted outside to allow a rapid and safety assemblage. The wet seal is given by special gaskets and silicone used during the assemblage.
Divisible Silo Φ3500 mm
They are the best answer for geographically decentralized or abroad yards, where the incidence of the transport is notable if compare to the value of the same silo.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Fluidization system with n. 8 pads
- Butterfly manual valve for closing unloaded mouth
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS4/3,5/75 | 75 | 105 | 7000 | 11350 |
DS4/3,5/90 | 90 | 125 | 8750 | 13100 |
DS4/3,5/105 | 105 | 150 | 10500 | 14850 |
DS4/3,5/120 | 120 | 170 | 12250 | 16600 |
| |
Divisible Silo Φ4600 mm
The divisible silos of this series satisfy yards' demands for concrete production that have middle cement storage and have to limit the maximum heights of installation.
In this series vertical bands gets bolted outside with roof and cone divided in sectors.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS6/4,6/150 | 150 | 210 | 7550 | 12560 |
DS6/4,6/175 | 175 | 245 | 9060 | 14070 |
DS6/4,6/200 | 200 | 280 | 10570 | 15580 |
DS6/4,6/225 | 225 | 315 | 12080 | 17090 |
DS6/4,6/250 | 250 | 350 | 13590 | 18600 |
| |
Divisible Silo Φ6130 mm
These silos are perfect for company with high cements storage but they can use also for small clusters of silos. They allow the storage and load on tank trucks of the loose cement.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS8/6,1/275 | 275 | 385 | 7550 | 13520 |
DS8/6,1/320 | 320 | 450 | 9060 | 15030 |
DS8/6,1/365 | 365 | 510 | 10570 | 16540 |
DS8/6,1/410 | 410 | 574 | 12080 | 18050 |
DS8/6,1/455 | 455 | 637 | 13590 | 19560 |
| |
Divisible Silo Φ7680 mm
These silos can be used for storage and load on tank trucks of loose cement.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS10/7,6/460 | 460 | 640 | 7550 | 15400 |
DS10/7,6/530 | 530 | 740 | 9060 | 16910 |
DS10/7,6/600 | 600 | 840 | 10570 | 18420 |
DS10/7,6/670 | 670 | 940 | 12080 | 19930 |
DS10/7,6/740 | 740 | 1040 | 13590 | 21440 |
| |
Divisible Silo Φ9276 mm
This series is the most used to realize storage clusters of middle-high capacity and load on tank trucks of loose cement. These silos have well 12 feet with an open beam and the possibility to install low pressure fluidization system.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS12/9,2/800 | 800 | 1120 | 9060 | 18800 |
DS12/9,2/900 | 900 | 1260 | 10570 | 20310 |
DS12/9,2/1000 | 1000 | 1400 | 12080 | 21820 |
DS12/9,2/1100 | 1100 | 1540 | 13590 | 23330 |
DS12/9,2/1200 | 1200 | 1680 | 15100 | 24840 |
DS12/9,2/1300 | 1300 | 1820 | 16610 | 26350 |
DS12/9,2/1400 | 1400 | 1960 | 18120 | 27860 |
DS12/9,2/1500 | 1500 | 2100 | 19630 | 29370 |
| |
Divisible Silo Φ12500 mm
These silos allow notable capacity of storage (until 3000 m3) to realize storage clusters with great capacity and load on tank trucks of loose cement. These silos have 16 feet with open beams, in addition there’s the possibility to install low pressure fluidization buffer feeding by blower.
Standard Accessories:
- Crawl space 400 mm
- Predisposition for level gauge
- Kit of galvanized bolts and gaskets for the assemblage
|
Model | Area (m3) | Capacity (ton-cement) | M (mm) | H (mm) |
DS16/12,5/1795 | 1795 | 2390 | 10570 | 22070 |
DS16/12,5/1980 | 1980 | 2630 | 12080 | 23580 |
DS16/12,5/2165 | 2165 | 2880 | 13590 | 25090 |
DS16/12,5/2350 | 2350 | 3130 | 15100 | 26600 |
DS16/12,5/2535 | 2535 | 3380 | 16610 | 28110 |
DS16/12,5/2720 | 2720 | 3620 | 18120 | 29620 |
DS16/12,5/2905 | 2905 | 3860 | 19630 | 31130 |
DS16/12,5/3090 | 3090 | 4110 | 21140 | 32640 |
| |